詳細內容：產品基本信息： 型號：synth EG 4-320 英文名稱:Klubersynth EG 4-320 粘度等級：ISO VG 320 品牌/產地：克魯勃，德國 包裝規格及價格：19L/3800 200L/35800 類型：高性能合成齒輪油 寶貝描述： Klübersynth EG 4-150(220,320,460,680,1000) 合成高性能齒輪油 說明:Klübersynth EG4G該油是合成高性能齒輪油符合要求的電和AGMA。他們還礦物油混溶。除了其出色的防腐和抗磨損性能，這些油是非常耐老化和氧化，并提供卓越的服務在低溫下。他們還表現出低的趨勢以泡沫。在FZG測試（A10/16，6R/90）的擦傷負荷的GL- 4的容量達到了。 應用領域：Klübersynth EG4該油特別適合潤滑摩擦點受到高負荷在很寬的溫度范圍。該油可以用來潤滑刺激，斜面和蝸輪。Klübersynth EG4穩定根據剪應力，并提供破乳劑優異的性能。中立的油反應總體上如常見的密封材料NBR或FPM和油漆。護理但應采取的從不同的彈性體制造商可以有不同的行為。因此，在“兼容性提供的數據與彈性體“一節應作參考，僅供參考。 性能：Klübersynth EG4合成高性能齒輪油劃傷負載能力符合API GL4與礦物油混溶出色的防腐蝕保護耐老化 包裝規格：19L,208L 德文： Klübersynth EG 4 oils Synthetic high-performance gear oils Synthetic high-performance gear oils Description The Klübersynth EG 4 oils are fully synthetic high-performance gear oils conforming to the demands of CLP and AGMA. They are also mineral oil miscible. In addition to their excellent anticorrosion and anti-wear properties, these oils are very resistant to ageing and oxidation and offer exceptional service at low temperatures. They also show a low tendency to foam. In the FZG test (A10/16,6R/90) a scuffing load capacity of GL 4 was achieved. Fields of application The Klübersynth EG 4 oils are particularly suitable for lubricating friction points subject to high loads over a wide temperature range. The oils can be used to lubricate spur, bevel and worm gears. Klübersynth EG 4 oils are stable under shear stress and offer excellent demulsifying properties. The oils react on the whole neutrally to common seal materials such as NBR or FPM and lacquers. Care should nevertheless be taken, as elastomers from different manufacturers can behave differently. Therefore the data given in the compatibility with elastomers“ section should be used for reference purposes only. For this reason a compatibility test should always be carried out with the elastomers which are actually used. Application notes The oils can be applied using the immersion, immersion circulation and injection methods. Total loss lubrication is possible with drip-feed, brush or oil feeder application. It is possible to apply the oils automatically, but attention should be paid to the maximum processableviscosity value in the manufacturer’s instructions. Viscosity selection for rolling bearings and gears To determine the correct oil viscosity please refer to the bearing manufacturer’s instructions or worksheet 3 from the Society of Tribology (GfT). The gear manufacturer’s instructions always take priority when determining the oil viscosity for gears. If instructions are not available from the gear manufacturer then the viscosity can be determined from the Klübersynth EG 4 oils – Selection of oil viscosity for gears“ work sheet. Operating temperature range Operating temperature values are reference values which have been established according to the lubricant structure, desired application and application engineering. Gear and chain lubrication by immersion: Klübersynth EG 4-150 /...220 from approx. -35 °C to 140 °C Klübersynth EG 4-320 /...460 from approx. -30 °C to 140 °C Klübersynth EG 4-680 from approx. -25 °C to 140 °C Klübersynth EG 4-1000 from approx. -15 °C to 120 °C Storage The minimum shelf life is approx. 36 months when stored carefully in a dry place and in closed original containers. Klübersynth EG 4 oils Synthetic high-performance gear oils Scuffing load capacity conforms to API GL 4 Miscible with mineral oil Excellent corrosion protection Ageing resistance Package sizes 19 l canister 208 l drum