詳細內容：產品基本信息： 型號：oil GEM 1-68 N 英文名稱:KLUBERoil GEM 1-68 N 粘度等級：ISO VG 68 品牌/產地：克魯勃，德國 包裝規格及價格：20L/4050 200L/29000 類型：齒輪油/多用途油 寶貝描述： KLUBEROILGEM 1 N齒輪和多用途油的基礎上選定的礦物油具有極高的抗氧化性能。他們有很高的耐劃傷和微FVA 54號的規定，在。良好的抗磨特性,KLUBEROIL GEM 1 N油也被證明滾動軸承標準FAG FE 8齒輪油的試驗臺。KLUBEROIL GEM 1 N油也提供了良好的防腐蝕和中性朝最有色金屬，彈性體和內墻涂料中常用的齒輪建設。 產品信息： KLUBEROIL GEM 1 - 46 ... 680基于礦物油的高性能齒輪油/多用途油潤滑油科技KlüberComp KLUBEROIL GEM 1 - 46 ... 680 N，。編號：030050，030051，030054，030057，030058，030062，030063，030064，EN版08.10，取代版06.09MA-TM/HSi 應用: KLUBEROIL GEM 1 N油開發了用于潤滑的直齒圓柱齒輪，錐齒輪，準雙曲面齒輪和行星齒輪，受高負荷。這樣的齒輪中經常使用的風，鋼鐵，采礦業和制糖業。KLUBEROIL GEM 1 N油也可用于標準蝸桿齒輪的潤滑DIN 3996標準中定義。它們也可用于潤滑的滑動和滾動軸承，各種齒聯軸器，鏈條，導軌，關節，主軸和泵。 應用筆記： KLUBEROIL GEM 1 N油可應用于手段，浸入循環或注入。滴飼料注油器，刷子，油罐或使用也是合適的自動潤滑系統可能。當使用自動潤滑系統，請注意制造商的說明關于允許的最大粘度。低粘度的潤滑劑也可用于油的油霧潤滑。應該指出的是，彈性體由一種或幾個廠家可以有不同的行為;因此應該進行測試。 粘度的選擇: 當確定齒輪油的粘度，制造商的指示優先考慮。僅適用于制造商的應用場合指令是不可用的，合適的粘度可確定放下在DIN51 509。要確定正確的機油粘度軸承，請遵守軸承制造商的說明。 包裝尺寸：20L桶 200L鼓桶 （原文德語） Klüberoil GEM 1-N High-performance gear and multi-purpose oils Description： The oils of the Klüberoil GEM 1-N series are high-performance gear and multi-purpose oils on a mineral oil basis. They comply with the CLP gear oil requirements, DIN 51 517 Pt 3. They stand out for their good antiwear and anticorrosion properties and their neutrality towards nonferrous metals. All oils of this series are free from silicone and have a low foaming tendency. In the tests according to DIN 51 354 Pt 2, A/8.3/90 (FZG test), these oils had a scuffing load stage > 12 and a change in specific weight ≤ 0.2 mg/kWh. Application: Klüberoil GEM 1-460N oils are suitable for the lubrication of friction points subject to high loads in spur, bevel and worm gears, rolling and sliding bearings, spindles, chains, guideways, joints and toothed couplings. The low-viscosity oils of this series can also be used in hydraulic systems. Application notes: The Klüberoil GEM 1-N series can be used for immersion, immersion/ circulation, and injection lubrication. In addition, these products can also be applied through a force-feedsystem, an automatic lubrication system, by brush or oil can. When using an automatic system, observe the manufacturer’s instructions on the maximum viscosity which can be used. The low-viscosity oils of this series can also be used for oil-mist lubrication. Service temperature range*: Lubrication of gears and chains by immersion: ISO VG 46 to 68: from approx. – 15 °C to approx. 100 °C ISO VG 100 to 220: from approx. – 5 °C to approx. 100 °C ISO VG 320 to 680: from approx. 0 °C to approx. 100 °C Total loss lubrication depending on relubrication: up to approx. 120 °C Minimum shelf life: The minimum shelf life is approx. 36 months if the product is stored in the original closed container in a dry place. Pack sizes: 20 l canister 200 l drum Klüberoil GEM 1-N oils Comply with CLP gear oil requirements Free from silicone Resistant to ageing and oxidation Anti-wear properties FZG scuffing load stage > 12